How to Replace a Washing Machine Hose
Quick Answer
Turn off water valves, disconnect old hoses, attach new hoses with rubber washers, and hand-tighten plus a quarter-turn with pliers.
How to troubleshoot How to Replace a Washing Machine Hose
A bulging or leaking washing machine hose can burst and flood your home. This guide covers safely replacing both inlet and drain hoses.
Step-by-Step Fix
- Turn off the cold and hot water supply valves at the wall.
- Unscrew the old inlet hoses from the wall valves and the washing machine.
- Remove the old drain hose from the standpipe or sink.
- Screw the new inlet hoses onto the wall valves, then onto the washing machine, ensuring rubber washers are seated.
- Hand-tighten the connections, then give them an extra quarter-turn with pliers.
- Insert the new drain hose into the standpipe and secure it.
- Turn water back on and check for leaks during a test wash cycle.
Common Error Codes
| Code | Meaning | Resolution |
|---|---|---|
| Hose leaks at connection | Washer missing or cross-threaded | Check that the rubber washer is present and not damaged. |
| Water pressure low | Inlet valve filters blocked | Clean the filters at the machine's inlet ports. |
Frequently Asked Questions
How often should I replace washing machine hoses?
Every 5 years, or immediately if you see bulging or cracking.
Should I use braided stainless steel hoses?
Yes, they are more durable and burst-resistant than rubber ones.