How to Replace a Shower Screen Seal
Quick Answer
Remove the old seal by pulling it out, clean the channel, measure and cut new seal to length, and press it into place.
How to troubleshoot How to Replace a Shower Screen Seal
A worn shower screen seal can cause water to leak onto the bathroom floor. This guide covers removing the old seal and installing a new rubber or magnetic seal.
Step-by-Step Fix
- Carefully pull the old seal out of the aluminium channel on the shower screen.
- Clean the channel thoroughly with a degreaser to remove soap scum and debris.
- Measure the length of the channel and cut the new seal to the exact length using a sharp knife.
- Apply a small amount of silicone lubricant to the new seal to help it slide in.
- Press the new seal into the channel starting from one end, working your way along.
- Test the seal by closing the shower door and checking for any gaps.
Common Error Codes
| Code | Meaning | Resolution |
|---|---|---|
| Seal won't stay in | Channel too wide or seal too small | Use a seal with a larger fin or apply a bead of silicone to hold it. |
| Water still leaks | Seal not making full contact | Adjust the door hinges or install a secondary drip rail. |
Frequently Asked Questions
What type of seal do I need for a shower screen?
It depends on your screen – measure the channel width and choose a compatible rubber or magnetic seal.
Can I use silicone instead of a rubber seal?
Silicone is a temporary fix; a proper rubber seal is more durable.