How to Replace a Quick-Release Skewer
Quick Answer
Remove the old skewer, install the new one through the hub, and tighten the quick-release lever.
How to troubleshoot How to Replace a Quick-Release Skewer
A worn quick-release skewer can be dangerous. This guide covers removing and installing a new quick-release skewer.
Step-by-Step Fix
- Open the quick-release lever and remove the old skewer.
- Insert the new skewer through the wheel hub.
- Position the springs on both sides of the hub.
- Tighten the nut on the end of the skewer.
- Close the lever - it should leave a slight imprint on your palm.
Common Error Codes
| Code | Meaning | Resolution |
|---|---|---|
| Wheel is loose | Skewer not tight enough | Tighten the nut and close the lever firmly. |
| Lever will not close | Nut too tight | Loosen the nut slightly. |
Frequently Asked Questions
What is the correct lever position?
The lever should point towards the rear of the bike or fold neatly against the frame.
Can I use a bolt-through axle instead?
Yes, if your fork and frame are compatible.