How to Repair a Venetian Blind Cord
Quick Answer
Remove the blind, unthread the old cord, use the old cord as a guide, and thread the new cord through the same route.
How to troubleshoot a Venetian Blind Cord
A broken cord on a Venetian blind can render it unusable. This guide covers restringing the blind with new cord and restringing the ladder system.
Step-by-Step Fix
- Remove the blind from the window and lay it flat on a work surface.
- Remove the caps from the bottom rail and pull out the old cord completely.
- Use the old cord as a template to cut the new cord to the correct length.
- Thread the new cord through the top rail, down through the slats, and through the bottom rail.
- Tie a knot in the cord at the bottom rail and replace the caps.
- Install new tassels and check the operation by raising and lowering the blind.
Common Error Codes
| Code | Meaning | Resolution |
|---|---|---|
| Blind doesn't stay up | Cord not locked in the mechanism | Ensure the cord is correctly seated in the locking mechanism. |
| Slats are uneven | Cord tension uneven | Adjust the cord tension by pulling and repositioning the cord. |
Frequently Asked Questions
Can I fix a broken cord without removing the blind?
It is much easier to remove the blind for restringing.
Where can I buy replacement cord for blinds?
Hardware stores or online retailers sell blind cord by the metre.