How to Repair Holes in a Laundry Plastic Tub
Quick Answer
Clean the crack, apply epoxy, embed the fibreglass mesh, and cover with another layer of epoxy, then sand smooth.
How to troubleshoot Holes in a Laundry Plastic Tub
A cracked plastic laundry tub can be repaired with a two-part epoxy and fibreglass mesh for strength.
Step-by-Step Fix
- Clean the cracked area with a degreaser and roughen the surface with sandpaper.
- Mix the two-part epoxy according to the instructions.
- Apply a layer of epoxy over the crack, then press the fibreglass mesh into it.
- Apply a second layer of epoxy over the mesh, covering the entire repair area.
- Let it cure for 24 hours, then sand the area smooth.
- Test for leaks by filling the tub with water.
Common Error Codes
| Code | Meaning | Resolution |
|---|---|---|
| Repair leaks | Epoxy not covering entire crack | Apply an additional layer of epoxy and ensure full coverage. |
| Repair cracks | Epoxy too brittle | Use a more flexible epoxy or add a second layer of mesh. |
Frequently Asked Questions
Can I use this method on a shower tray?
Yes, as long as it's a plastic tray and you use a waterproof epoxy.
How long does the repair last?
A properly done epoxy repair can last many years.