How to Fit a Shed Power Supply
Quick Answer
Dig a trench, lay SWA cable, install a consumer unit in the shed, and connect to the house.
How to troubleshoot How to Fit a Shed Power Supply
A shed power supply requires SWA cable and a consumer unit. This guide covers installing power to a garden shed.
Step-by-Step Fix
- Plan the route from the house to the shed.
- Dig a trench at least 450mm deep.
- Lay SWA cable in the trench, adding warning tape above it.
- Install a consumer unit in the shed.
- Connect the cable to the house consumer unit.
- Test the circuit and RCD protection.
Common Error Codes
| Code | Meaning | Resolution |
|---|---|---|
| Power trips | Faulty cable or connection | Check cable integrity and connections. |
| No power in shed | RCD tripped or connection fault | Check consumer unit and connections. |
Frequently Asked Questions
Do I need an electrician for shed power?
Yes, this work requires a qualified electrician.
How deep should the cable be buried?
At least 450mm deep with warning tape.